Interiokeys logo

Quick Links

partnerPartner with Us
about-usAbout Us
blogOur Blogs
contact-usContact Us
Bar Lounge with Retro Wave Wall and Brass Mirror
Bar Lounge with Retro Wave Wall and Brass Mirror
View full project
Previous space

Bar Lounge with Retro Wave Wall and Brass Mirror

The back wall is a set of curved bands in mustard, orange and terracotta, cut like a wave and wrapped around a round brass mirror. It is loud, and that was the brief for a bar. The teal fluted bar counter stands in front of it on a brass base, and the two woven stools are dark against all that colour. Herringbone wood runs underfoot here instead of the marble used elsewhere. The bar opens straight onto the theatre seating. You give up some quiet, since the two zones share one room.

Highlight
Retro wave feature wall with round brass mirror
Layout
Open Layout
Theme
Contemporary
Colour
Wall: Mustard, Terracotta
Unit: Teal
Special Features
  • Retro wave feature wall
  • Round brass mirror inset
  • Teal fluted bar counter
  • Woven bar stools
  • Fibre-optic star ceiling
  • Herringbone wood floor

About Bar Lounge Interiors

Common questions from homeowners.

The back wall is a wave of curved bands in mustard, orange and terracotta that wraps around a large round brass mirror. The bands are cut and layered so the wall has real depth, not just a printed graphic. A bar is the one room where you can push colour this hard, so we did. The round mirror at its centre catches the light off the balcony and throws it back inside. Everything else here stays dark to let the wall shout.

The counter front is fluted in a deep teal with a slim brass base running along the floor. Fluting throws a soft vertical shadow, which stops a solid slab of colour from looking flat under the spotlights. Teal was picked to sit against the warm mustard wall rather than blend into it. The top is a pale stone that wipes clean, the surface you actually set glasses down on. Two woven stools tuck under it when not in use.

The ceiling here goes glossy and dark, then carries a fibre-optic star field that shows at night once the main lights drop. It is the same trick used next door in the theatre, kept consistent so the open room feels like one space. The gloss also doubles the height by reflection. Recessed spots handle the working light for pouring and mixing. When you want the mood, you kill those and leave the stars and the balcony glow.

We switched to a herringbone wood-look floor for the bar and theatre, away from the marble used in the living areas. Wood underfoot warms a room built for evenings and takes the edge off all the hard gloss and glass around it. The herringbone lay adds a quiet pattern that stays in the background. It is also more forgiving than polished marble if a drink goes down. The tone was kept mid-brown so it grounds the bold colours above.

Yes, a tall narrow niche with glass shelves is set into the coloured wall beside the mirror. It is lit so a few bottles show as display rather than clutter. Keeping it slim was deliberate, since a big cabinet would have broken the wave pattern running across the wall. The round brass piece to its right is actually a mirrored grille, which hides the wall behind while bouncing light. Together they give the flat wall two points of interest.

Less than people expect. This one is a slim counter against a feature wall, not a walk-around island, so it fits along a single wall in a lounge or a wide passage. You need about the depth of the counter plus room to pull out two stools. The real space cost is the seating you give up to it. If your room is tight, drop the stools and keep the counter as a serving ledge with storage below.

It can, and that is the honest risk with a strong retro palette. The way to slow it down is to keep the bold colour on one built element you can change later, not on the flooring or the ceiling. Here the wave wall and the teal counter carry the trend, while the wood floor and dark seating stay neutral. Reface those two pieces in a few years and the room resets. The bones underneath are calm on purpose.

Most of the cost is in the making, not the materials. The wave wall is cut and layered by hand, and the round brass mirror grille is a custom piece, so labour and fabrication drive the figure more than the paint or the board. The fluted counter with a brass base sits in the same bracket. A plain painted accent wall with a stock round mirror gets you a hint of the look for far less. Price the custom pieces first.